Heating and Cooling Services in Trotwood, Ohio

Providing Expert HVAC Services in Trotwood, Ohio

Trotwood is located 9 miles southeast of Dayton and is part of Montgomery County. The city was once home to the great grandfather of Iam’s pet food creator. His house still stands today and services as the home of the city’s Historical Society. It is also the location for the annual Iam’s Homestead Pioneer Harvest Fest, where friends and families come to enjoy blacksmith demonstrations, civil war displays, hayrides, and more. We here at Springboro Heating & Cooling are honored to provide our services to the residents of Trotwood.

Springboro Heating & Cooling is proud to be a part of the community of Trotwood and the Greater Dayton Area. With our stress-free and quick scheduling options, we are here to help you. Call us today at (937) 600-6834 to speak to one of our friendly customer service representatives or schedule online here with our convenient online form, and we will contact you shortly to schedule an appointment.

Springboro Heating & Cooling Reviews

powered by BirdEye
powered by BirdEye

Local Reviews
for Trotwood, OH


Justin S.

Justin S.

158084

Near Fairgrove Way, Trotwood, OH 45426
Jeffery R.

Jeffery R.

157466

Near Strader Dr, Trotwood, OH 45426
Josh A.

Josh A.

154624

Near Trotwood, OH 45426
Mike H.

Mike H.

Upon arrival the customer advised that furnace would run but was not heating the home. I cycled the furnace on, would light then go out a few moments later. Flame sensor reading .1-.4uA. Pulled and cleaned flame sensor. After replacing sensor read 2.2uA. Cycled furnace again and allowed to run approximately 15 minutes with no further issues. I also found the filter extremely dirty and restrictive. I pulled the filter, and the customer stated that they would go pick up a new filter tonight. At time of departure furnace operational.

Near N Sherry Dr, Trotwood, OH 45426
Trotwood, OH - Upon arrival the customer advised that furnace would run but was not heating the home. I cycled the furnace on, would light then go out a few moments later. Flame sensor reading .1-.4uA. Pulled and cleaned flame sensor. After replacing sensor read 2.2uA. Cycled furnace again and allowed to run approximately 15 minutes with no further issues. I also found the filter extremely dirty and restrictive. I pulled the filter, and the customer stated that they would go pick up a new filter tonight. At time of departure furnace operational.
James L.

James L.

I completed a heating safety tune up on a Payne gas furnace. I visually inspected the unit. Checked voltages, amps and pressures. Completed combustion analysis. Cycled and monitored system. Operating normally at this time.

Near Fairgrove Way, Trotwood, OH 45426
Trotwood, OH - I completed a heating safety tune up on a Payne gas furnace.  I visually inspected the unit.  Checked voltages, amps and pressures.  Completed combustion analysis.  Cycled and monitored system.  Operating normally at this time.